9
Lamp Adjustment
The lamp can be tilted upward 45º and
tilted down 60º.
Tilt downward 60º
Tilt down 45º
WARNING
Manual Override Mode:
The light can be switched on for longer time periods by use of the Manual
Override Mode.
This can be activated at night by using the internal wall switch or circuit
breaker.
Switch the internal wall switch/circuit breaker single (OFF/ON) within 1.5
second.
The unit will now illuminate continuously until dawn or until switched back
into Auto Mode.
To switch the unit back into Auto Mode, switch the internal wall switch/circuit
breaker once (OFF/ON) within 1.5 second.
The unit will return to its Auto mode and will operate as set up after the walk
test procedure.
Note: The Manual Override will not work if the flood light is set into Test Mode
(i.e Time Knob set fully clockwise)
-20
+40
10
20
30
40
50
60
This product will get warm when in
normal use. Can be installed on
surfaces of normal flammability
e.g. wood, plasterboard, brickwork
and other masonry. Do not install
on flammable surfaces such as
plastics.
