timecode systems AirGlu2, Руководство пользователя

Страница: 9 / 27

UK Timecode Systems Ltd. Unit 6, Elgar Business Centre, Moseley Road, Hallow, Worcester.
WR26NJ. UK
Individual Device
–
Static Data
STSS? (For use with individual device
–
Use BLSS=n if through BLink master)
The current status will be returned as an ASCII string with each status comma
delimited on each line. The status’ to be returned will be:
-
1. Unit Type
2. Unit Device Type Name
3. Firmware Revision * 100
4. FPGA Revision * 100
5. Ext Revision * 100
6. S1C Revision
7. Device Capability Flags
–
See Appendix
The device capability flags state what functions can be used with the device, such as
if a display is fitted, has Wifi capability, or external Sync port etc. This is denoted
using a 32bit hexadecimal number.
A typical return from this request will be:-
STSS=11,UltraSyncBLU,201,106,0,5,E0F07040<LF>
Individual Device
–
Poll Changing Data
STSP? (For use with individual device
–
Use BLSP=n if through BLink master)
Poll for changing status information from the current device.
The status’ will be returned as
an ASCII string with each status comma delimited on
each line. The status’ to be returned will be:
-
1. Current Assigned Network Group Number
– ‘0’/’A’ – ‘F’
2.
Current UserBits “UUUUUUUU”
3. Data changed flags (8bit hex) - see below
4.
Ext Sync Std (0=Off, 1=PAL… see
GLSD command)
5. Battery Percentage
6. On PSU (0 or 1)
7. RF Signal Strength (0 to 99)
8. Friendly name
Data changed flags
–
Bit definitions;
0. Main Static data Changed
–
use BLSS? to get changes
1. Main Polloing data Changed
–
use BLSP? to get changes
2. Attached device static data changed
–
use GCSS?
3. Attached device polling data changed
–
use GCSP?
4-7 Undefined
A typical return from this request will be:-
BLSP=1,B,65,CAFEF00D,05,40,0,65,UltraSync 1<LF>
STSP=0
Clear Data Changed flags