INNER
INNER
Fittings Checklist
Qty
Code
Description
A
x20
C
x20
Spring Washers (for M8 bolts)
D
Qty
Code Description
B
Spring Washers (for M8 bolts)
B
Allen Key (for M8 bolt)
x1
Bolts (M8x30mm) for
fitting side rails (3&4) and to
headboard & footboard (1&2)
Flat Washers (for M8 bolts)
E
x1
Spanner (for M8 nut)
Metal Plates for Slat Frame
x6
G
Nuts (for M8 slat frame bolts)
x6
x6
F
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
x22
C
Flat Washers (for M8 bolts)
x18
HARDWARE FOR FITTING METAL SLAT FRA ME (PACK B)
Bolts (M8x50mm) for fitting
Metal Slat Frame (5) to
slat frame support bars
x2
F
Bolts (M8x50mm) for fitting
Slat Frame Support Rail (9) to
Footboard (2)
x6
J
Bolts (M8x20mm) for fitting
Metal Plates (K) and Cross
Bar (7) to Metal Slat Frame (5)
x2
K
Qty
Code
Description
Qty
Code Description
H
Flange Lock-Nuts (M8) for
gas-lift pistons
x2
Page 2 of 8
Additional Tools Required
Care & Maintenance
Please
retain
your
assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
General Hints & Tips
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
Intersecting
Hole
We
recommend
the
bed is
assembled in
the
room it shall be
located in.
A
ssembly requires
two persons.
Approximate time to
assemble this product
1.5 Hrs
No Additional Tools Required
In the unlikely event of missing or damaged parts,
please contact your retailer. Please have this guide at
hand quoting the part code reference numbers shown
when requesting spare or replacement parts.
