Installing the outdoor siren
Before the outdoor siren is mounted, ensure the siren is in
Installation Mode, this reduces the risk of the siren being triggered
whilst being installed.
To activate installation mode, simply press the disarm button on the
remote control 3 times. The strobe LED will flash continuously when
the siren is in installation mode.
To install the outdoor siren, see steps below:
1.
Use a piece of paper to create a screw
template for the siren and mark the correct
screw positions onto the wall
2.
Using the screw template, drill the screws into
the wall
3.
Connect the siren to a main power supply
using the charging adapter provided
4.
Finish mounting by fixing the siren on to the
screws and position into place.
Once the siren has been installed successfully.
Press the disarm button on the remote control
again to deactivate installation mode.
