Version-01
Cal.VH8 Series
（
VH83A/88A
）
(4)Winding stem
・
How to remove:
Pull out the winding stem while pushing
the indented portion of the arrow.
(5)Battery
・
How to install:
Insert the battery in the aslant direction as shown by the arrow.
Check that the battery connection (+) touches securely
the side face of the battery.
・
How to remove:
Firstly slide the battery in the direction of the arrow with
tweezers,and then lift the battery.
(6)Insulator
・
How to set:
To insulate between the battery connection (+)
and the battery connection (-), the insulator
should be put at the two pins securely as bellow.
(7)Day jumper and Support for dial side parts
・
Reassembling procedures
The support for dial side parts spring sets to the
day jumper. (A position)
Day jumper
S
upport for dial side parts spring
A position
TECHNICAL GUIDE
8
Push
Pin
Insulator
