・
The explanation here is only for the particular point of Cal.VD31&VD32
1.REMARKS ON INSTALLING THE BATTERY
(1) Battery
・
How to install the battery
Remove the hook of the switch springs battery clamp portion.
Insert the battery sideways, and have the hook of the switch springs battery clamp portion catch
the main plate.
Battery clamp position
Hook
Main plate
Hook
Tweezers
(2) After the battery is replaced with a new one or after the
battery is reinstalled following the repairing procedures,
Be sure to touch the short-circuit the AC terminal of circuit
block and the switch spring with conductive tweezers
to reset the circuit as illustrated at right.
(3) When the battery replaced with a new one, the time information stored in the built-in IC and
the time indicated by the dual time of 24 hour hand do not correspond with each other.
Reset the dual time of 24 hour hand to "0" position following the procedure below.
If the dual time of 24 hour hand should move improperly, also follow the same procedure.
Note.
Refer to page 8 for each adjustment method.
6
SII Products
1
2
TECHNICAL GUIDE
Version-01
VD31&VD32
