INSTALLATION
Connect the control wiring to the terminals with the
contact markings (refer to the diagram on the unit).
Apply power.
ADJUSTMENT
No calibration or adjustments needed for this
device.
WARRANTY
The
Model 2602 Voltage Sensor
is warranted to
be free from defects in materials and workmanship
for one year. If the Model 2602 fails to operate, for
any reason, we will repair or replace it free, for one
year from the date of purchase. Contact the Time
Mark Sales department, Monday through Friday;
8 a.m. to 5 p.m., CST, for further details.
TYPICAL APPLICATION
MODEL 2602
Voltage Sensor
READ ALL INSTRUCTIONS BEFORE INSTALLING, OPERATING OR SERVICING THIS DEVICE.
KEEP THIS DATA SHEET FOR FUTURE REFERENCE.
GENERAL SAFETY
POTENTIALLY HAZARDOUS VOLTAGES ARE PRESENT AT THE TERMINALS OF THE MODEL 2602.
ALL ELECTRICAL POWER SHOULD BE REMOVED WHEN CONNECTING OR DISCONNECTING WIRING.
THIS DEVICE SHOULD BE INSTALLED AND SERVICED BY QUALIFIED PERSONNEL.
Installation Instructions
TIME MARK is a division of
Telephone: Main - (918) 438-1220
Sales - (800) 862-2875
Fax: (918) 437-7584
E-mail: sales @time-mark.com
Internet: http://www.time-mark.com
Doc No. 87A223 12/00
© 2000
TIME MARK CORPORATION
1 1 4 4 0 E a s t P i n e S t r e e t
T u l s a , O k l a h o m a 7 4 1 1 6
Shows No Power Applied
TROUBLESHOOTING
Should the Model 2602 Voltage Sensor fail to
operate, check all connections. Verify that power
is present, and check all fuses. Should problems
persist, contact the factory at 800-862-2875 for
assistance.