Arming
Press the ARM button on the remote control
ensuring that the distance to the main unit
is 5m or less and within ±30°. A short bleep
will be heard to confirm the unit has been
armed. This is followed by 60 seconds to
allow PIR stabilisation and your exit, ended
by a further bleep to indicate the unit is
active.
Entry Delay and Alarm Timing
There is a 20 second delay after
detection before the unit sounds the
alarm (allowing users to disarm the
unit when returning) after the 20
second delay the alarm sounds for 2
periods of 30 seconds separated by 30
seconds of silence.
Disarming
Press the DISARM button on the remote
control (this also stops the TG123SK if it is
already sounding the alarm).
8
TG123SK_Instructions.qxd 2/5/06 4:34 pm Page 9
