Time Electronics
User Manual
7078 Digital Pressure Gauge
v2.0
7078 Digital Pressure Gauge
Page 7 of 10
3.3
Operating Instructions
Note:
Use PTFE thread tape seal on the 1/4” NPT threads prior to mounting the gauge onto a pressure source
if required.
•
Press the power button. The display will illuminate and show the following:
1. The pressure reading (shown centrally in large digits).
2. Pressure unit (underneath the pressure reading).
3. Battery power level.
4. Calibration due date.
5. Gauge serial number.
6. Software revision number.
•
To Zero the gauge, press and hold the “Zero” button for one second.
Note: It is normal for the thousandths digit to rise and fall slightly after this is done.
•
Using a pressure source, bring the pressure up to the desired level and wait a moment for
it to stabilize before taking readings.
•
If different pressure units are desired, press the “Units” button to cycle through the choices.
