Use
.
1. Plug the power cord in the euro socket with connected grounding.
Do not use the appliance on uneven surfaces and close to inflammable or
easily deformable objects.
Connect the appliance to the mains only after the thermostat and POWER
switches (heating power controls) are set to OFF position.
Do not cover the appliance.
The appliance works from the AC power source, voltage of which meets
the value indicated on the heater nameplate.
1. Press one of the buttons on the appliance (ON position) and turn the
thermostat knob clockwise. The radiator start functioning; the indicator
lamps-buttons will light up
blue
.
NOTES
Timberk electric oil filled radiator contains a certain amount of specially
formulated oil. The oil is contained in radiator's sections. In case when
during repair it is required to open the oil-containing container (so-
called radiator section), repair must be carried out either in a Timberk
authorized service center or at the manufacturing plant. Repair must be
performed by qualified specialists! Therefore, if you detected an oil
leakage from the oil-containing sections of the radiator, contact only the
abovementioned places. Also you must follow rules regarding oil
disposal after opening of the unit in compliance with requirements of
Environmental Laws and Regulations, currently in effect in your country.
WARNING!
1. The heater sections are heated up to high temperature, therefore,
please carefully watch children being near the heater.
2. To avoid electric shock, never use the appliance near water or in wet
rooms.
3. Do not use the appliance in open areas outdoors.
4. In case of malfunctions in operation of the appliance, please contact
the nearest manufacturer's authorized service center for consultations
and repairs (you can find addresses of service centers in the appendix to
the warranty certificate or in website: www.timberk.com).
Never disassembly the appliance yourself.
5. Disconnect the appliance from the mains, when it is not used and
before washing.
ENGLISH
10
www.timberk.com
www.timberk.com
electric oil felled radiator
3
2. To prevent the risk of an electric shock, always disconnect the unit from
the mains, when it is not used. Remember that there is a slight chance of
an electric shock due to static voltage even if the unit is switched off.
3. Never use the unit in a situation when it can come in contact with water
(nearby a bath-room, a swimming pool, etc).
4. Never connect the unit to electric mains when it is damp (wet).
5. If you discover any damage of the power cord, never switch on the unit!
In this case we recommend to return the unit to an authorized service
center for an adequate repair. Never try to repair the power cord on your
own! It can harm your health, as well as void the guarantee maintenance
of the unit.
6. Never use the unit outside.
7
. It is forbidden to disassemble the unit on your own! It can harm your
health, as well as void the guarantee maintenance of the unit.
8.
It is forbidden to operate the unit in a horizontal or inclined position! It
may result in both failure of the unit and an accident.
9.
The unit must always be kept watched, especially if there are children
nearby the unit. Always watch out for children not to touch the unit by
hand and not to use it for games. Also be sure that very old or disabled
people couldn't use the unit (operating or switched off) by chance they
can accidentally get hurt.
10.
Prior to preventive cleaning of the unit, always switch off the unit (the
power regulator must be in OFF position switched off ) and disconnect it
from the mains by unplugging it from an electric outlet.
11.
Never pull the power cord and do not disconnect (unplug) the cord's
plug abruptly.
12.
Store the unit in a cool or warm place. Never store the unit in damp
rooms! We recommend you not to discard the packing if you are to store
the unit for several months.
13.
Pay attention to the fact that the radiator is equipped with a
European-standard plug matching the standard European-standard
outlet. The European-standard plug of the power cord must go into the
European-standard outlet without any effort. If the Europlug enters the
outlet tightly or doesn't enter it at all, please, turn the plug vertically by
180° and try again. If you still cannot plug it then you need to call for an
electrician to replace the electric outlet by the one matching a Europlug.
Never switch on the unit if the plug is not fully connected to the outlet.
I
n case of unit's malfunction, please, contact the nearest Timberk Service
Center for a consult and repair. You can always find addresses of service
centers in the attachment to your guarantee card or on our web-site
www.timberk.com in the Service section.
