Technical specifications
The technical specifications of heaters are given in Table 1.
Table 1
~
( )*
Gas cylinder type
(maximum capacity)
Gas consumption by
heating stages (1,2,3)
Parameter
Gas category
Heating power of gas-fired
burner by stages (1,2,3)
Gas pressure
Gas type
Unit
kW
g/h
2
m
mbar
kg
Heated room area
Rated current by stages
(1,2,3)
Rated voltage
Rated power by stages
(1,2,3)
Dimensions
Weight
V/Hz
kVt
kg
mm
For more detailed description of technical parameters and specifications please refer to our website
www.timberk.
com
or ask from the official dealers of TIMBERK.
4. Gas-fired heater description (Fig.1)
6. Preparation for work
1.
Carefully remove the heater from the package.
2.
Make sure that (for TGH 4200
O
2 model) the heating elements and other parts of
the appliance have no remaining crumbles of packing foam plastic or other debris.
3.
Carefully install the enclosed gas hose not twisting or breaking it. For that, screw one
end of the hose onto the gas valve connector, while the other end onto the connector
of the enclosed gas pressure controller (reducer). Secure the hose ends on the
connectors with jubilee clips.
4.
Install a paronite/rubber spacer inside the cap nut checking its integrity beforehand
and then carefully screw the nut on the outlet of an already prepared gas cylinder
having appropriate capacity (a gas cylinder is not included in the delivery set and
purchased separately). Twisting of the hose is strongly not allowed.
1.
Heater body
2.
Control panel
3.
Double switch of quartz electric heater (
TGH 4200
O
2
model)
4.
Quartz electric heater (
TGH 4200
O
2
model)
5.
Ceramic gas-fired burner
6.
Protective face grate
7.
Support wheels
8.
Gas valve
9.
Gas check valve*
10.
Gas hose
11.
Gas pressure controller (reducer)
12.
Gas cylinder clamp
13.
Gas cylinder*
14. Fuse burder
* Not included to set delivery
5. Delivery set
1. Heater on wheeled base
-
1 pc.
2. Gas pressure controller (reducer)
-
1 pc.
3. Gas hose (60 cm)
-
1 pc.
4. Jubilee clips
-
2 pcs.
5. Operation manual
-
1 pc.
6. Warranty certificate
-
1 pc.
7. Package
-
1 pc.
NOTE:
To improve the product quality, the design and technical specifications of the
heater, as well as its delivery set can be modified by the manufacturer without
preliminary notification.
Fig
.1
13
12
11
10
9
8
3
1
5
4
2
6
7
13
www.timberk.com
4
www.timberk.com
g
as heater
I3B/P
1,4/2,8/4,2
104/207/310
29-30
15
LPG (propane
and butane) G30
LPG (propane
and butane) G30
LPG (propane
and butane) G30
LPG (propane
and butane) G30
LPG (propane
and butane) G30
I3B/P
I3B/P
I3B/P
I3B/P
1,4/2,8/4,2
1,4/2,8/4,2
1,4/2,8/4,2
1,4/2,8/4,2
104/207/310
104/207/310
104/207/310
104/207/310
29-30
29-30
29-30
29-30
15
15
5
5
30-60
30-60
30-60
30-60
30-60
2,0/4,0/6,0
220-240/50
0,44/0,88/1,32
730 430 370
730 430 370
575 400 300
575 400 300
9.3
11.3
9.5
7.4
7.4
730 430 280
-
-
-
-
-
-
-
-
-
-
-
-
Model
TGH 4200
M
1 TGH 4200
O
2
TGH 4200
O
3
TGH 4200 SM1
TGH 4200 SM2
.
1,4
.
4.
« »
« »,
2,8
4,2
.
5.
.
« », « » « ».
1.
« »,
(
)
.
2.
,
(
)
.
3.
.
,
.
!
.
,
.
,
,
.
,
,
.
(
TGH 4200
O
2).
.3
1.
,
,
,
.
,
.
2.
(440
-
Econom
)
«I»
,
(
.3).
3.
(880
- Normal
)
«II»
,
.
4.
(1320
- Express
Heat
)
«I»+«II».
5.
« ».
.
!
.
1.
.
,
.
8.
1.
,
.
2.
,
,
.
3.
.
4.
,
.
5.
,
.6 «
».
2
2
3
3
1
LPG (propane
and butane) G30
I3B/P
1,4/2,8/4,2
104/207/310
29-30
15
30-60
9.5
730 430 280
-
-
-
TGH 4200 SM
3
The manufacturer reserves the right to change the set-list of the device (including liquid and powder components) for different
supplies without prior notice. The changes either in no way influence the basic technical parameters of the device or may improve
them, and also not violate the legislation or quality standards of the countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight and dimensions of the device, but not more than by +\- 5-20%
(depending on the product category)
NOTE:
Heater can be supplied with the connected gas hose and gear, in this case to
produce the above steps are not necessary.
Electric protection class
IPX0
IPX0
IPX0
IPX0
IPX0
IPX0
Water protection class
I
-
-
-
-
-
