Timberk T-IR1000-D10HU, Инструкция по эксплуатации

Страница: 13 / 24

13
Fig. 2*
1. Body of the device
2. Protection grille
3. Heating elements
4. Power mode selection buttons
5. Fall protection sensor
Fig. 3*
1. Power mode selection switch
2. Body of the device
3. Protection grille
4. Heating elements
5. Stand
6. Fall protection sensor
*The appearance of the device may differ from the images
in the manual
6. DELIVERY SET
1. Infrared heater
– 1 pc.
2. Instruction manual
– 1 pc.
3. Warranty card
– 1 pc.
4. Packaging
– 1 pc.
7. CONNECTION TO ELECTRIC MAINS
1. The heater is designed for connection to the single-phase 220V~, 50 Hz electric mains.
2. Connect the heater to electric mains using power cord with plug.
3. Connect the plug to electric outlet.
4. Before connection, make sure that specifications of the electric mains meet the
parameters indicated on the appliance nameplate.