Timberk T-HU4-A100E-WF, Инструкция по эксплуатации

Страница: 16 / 48

IM2021
16

Remove the electrical plug from the power outlet in
the following cases: before draining or filling the
tank with water; before assembly, disassembly and
cleaning, or if you do not use it; before
mounting/dismounting the humidifier elements;
before moving the humidifier to another location.
Install the humidifier on a flat, dry surface.

When disconnecting the appliance from the mains,
do not pull on the power cord, grasp the plug. Do
not twist and do not wind it on anything.

Humidifier’s steam can damage the surfaces it
touches. Do not install the humidifier on the floor,
or in the vicinity of heating appliances, walls,
furniture, or other items.

The manufacturer and seller are not responsible for
damage caused by improper positioning of the
humidifier. The humidifier should be installed on
any elevation, for example, on a table, stand, etc.
at least 60 cm from the floor and at least 10 cm
from the wall.

Do not put the humidifier in water or other liquids.

Do not install the humidifier in the corridor or in
other places where it may be hit, knocked over,
etc. If the humidifier is not in use, disconnect it from
the power supply.

Do not lay the power cord under carpets or other
objects. Position the humidifier so that the cord
can’t be accidentally touched. Make sure that the
power cord does not touch sharp edges or hot
surfaces.

Do not use outdoors or in high humidity areas.
Excessive humidity in the room can cause water to
condense on windows and furniture. If this
happens, turn off the humidifier.

Do not allow foreign objects to enter the humidifier.