Timberk T-FH1.2-B10MC-B, Инструкция по эксплуатации

Страница: 16 / 40

IM2021
16
between the marks. It is recommended to leave free space of 30 cm or more to the
sides of the marks.
- Drill holes in the wall based according to the marks and insert the supplied plastic
dowel. Tighten the mounting screw into the dowel.
- Make sure the mounting screws are tight, and install the heater on them.
Figure 2*
*The image is given for reference only and may differ from the actual control panel
8. OPERATION
Control panel
1. Connect the appliance to the electric mains. The appliance
switches into the standby mode, the LED display shows the current
room temperature.