Timberk T-DES12, Инструкция по эксплуатации, Страница: 9 / 24

IM2020
9

Turn on the device only when there is solution in the bottle. Use only cold water.
Recommended temperature of water: 10-
20 ºC. Do not use water with temperature
higher than 40 ºC.

Do not fill the water over MAX mark on the bottle. Minimal amount of water in the
bottle is 100 ml.

WARNING: unplug the device before cleaning.

Disinfectant must be used only on external surfaces and objects. It is intended only
for external use. Do not drink the disinfectant, do not pour it on mucous membrane.
Store the device away from children.

If the
solution is heated over 40 ºC, it must be discarded.

Do not mix the solution with alcohol, other disinfectants, alkali, or organic
substances.

The disinfectant solution can corrode and bleach metal and fabric. Do not use metal
capacity to store the solution. If it is necessary to disinfect metal surfaces or objects,
after disinfection rinse immediately these surfaces or objects with water and wipe
them dry. Use the solution carefully on colored and dark fabric. Do not allow the
solution to soak into silk materials. Do not put the solution on freshly painted
surfaces, when paint is still wet.

Do not use the disinfectant is closed spaces. Open the window while using the
disinfectant in cars.

After disinfection of toys it in necessary to rinse them with large amount of water.

In case of contact with eyes or mucous membranes, rinse it immediately with large
amount of water. In case of any discomfort contact a doctor immediately. Do not use
the solution on pets.

Do not use the device and do not atomize the solution near open sources of fire.

Do not put the body of the device near a source of fire. It is forbidden to store the
device inside the microwave.

Store in dry, slightly cool and ventilated area away from sources of light. After
plugging in the device, do not touch the water inside.

After using the device, remove the remaining solution from the bottle. Rinse the
bottle with fresh water, then, let it soak in a dry and ventilated place. This procedure
will help to increase the service life of the device.

Do not pour mineralized water, sea water or any other water solutions in the bottle.

Disassembly and maintenance of the base of the device must be carried out only by
qualified technician.

In order to ensure flawless operation of the device, continuous and long operation of
the device is forbidden. After each use of the device, make at least a 5 minutes
break.

Manufacturing date is indicated on the unit and/or on packing as well as in
accompanying documents in the following format XX.XXXX where first two figures
XX is the month of production, and following four figures XXXX is the year of
production.

The manufacturer reserves the right to introduce minor changes into the product
design without prior notice, unless such changes influence significantly the product
safety, performance, and functions.