Timberk Optima FS47 V Series, Инструкция по эксплуатации

Страница: 21 / 56

IM2021
21
5. DESCRIPTION OF THE WATER HEATER
Fig 1*
* The picture is for reference only and
may differ from the actual product
1. Upper combined protective cover
2. External decorative housing
3. Overflow system
4. Thermal insulation layer made of
polyurethane foam
5. Internal tank
6. Heating element
7. Thermostat sensor tube
8. Protective magnesium anode
9. Inlet pipe divider
10. Lower combined protective cover
11. Combined safety valve to protect
against water draining from the water
heater into the water main and to protect
the internal tank from excessive pressure
(mandatory installation on the cold water
supply pipe is required)
12. Emergency discharge of excess water pressure (when the water heater is
operating, water may leak from the pressure relief hole of the safety valve. This is
normal)
13. Hot water outlet pipe
14. The upper part of the hot water intake pipe
15. Control Panel
16. Thermal Switch
17. Inlet pipe
18. Connecting block
6. DELIVERY SET
1. Water heater
– 1 pc.
2. Anchor bolt
– 2 pcs.
3. Safety relief valve
– 1 pc.
4. Manual
– 1 pc.
5. Warranty card
– 1 pc.
6. Package
– 1 pc.
**The design of the thermometer may be changed without prior notice. Depending on
the batch, the thermometer may be missing, which does not affect the performance of
the product.