Timberk Natt T-AC07-S29-X, Инструкция по эксплуатации

Страница: 23 / 52

IM2020
23
Voltage higher or lower than the
voltage range
Before using the device,
check whether the technical
specifications indicated on
the product comply with the
power supply
Active TIMER-ON function
Wait untill the air conditioner
will turn on by timer or cancel
the timer setting
Damaged electronic control
board Contact an authorized service
center
The remote control batteries
have run out Replace remote control
batteries
Room temperature is too low or
too high
Use the device in the
operating temperature range
specified by the manufacturer
(see table of technical
specifications)
Strange smell
Air filter is dirty
Clean the air filter
Noise of running water
Back flow of liquid in the
refrigerant circulation
Not a malfunction
A mist comes from
the air outlet
This occurs when the air in the
room becomes very cold, for
example in the
COOLING or
DEHUMIDIFYING/DRY modes.
Not a malfunction
Strange noise This noise is made by the
expansion or contraction of the
front panel due
to variations in temperature and
does not indicate a problem.
Not a malfunction
Insufficient hot or cold
airflow Incorrect temperature setting.
Set the correct
air temperature
Air inlet or outlet of indoor or
outdoor unit are blocked. Remove foreign objects from
inlet and outlet
Air filter is dirty. Clean the air filter
Fan speed set at minimum. Increase the fan speed
Other sources of heat in the
room. Remove all heat sources
from the room
No refrigerant.
Contact an authorized service
center
The air conditioner is not
powerful enough for the room Use the device in an area
recommended by the
manufacturer (see table of
technical specifications).