Timberk AC TIM 07H P4, Инструкция по эксплуатации

Страница: 8 / 36

www.timberk.com • Electric air conditioner
8
remote control (only for AC TIm 09He P4
5
7
6
3
4
1
9
8
Fig. 9
1. FUNC mode selection button (SET):
You can select three functions with this button: cooling, heating and
dehumidification.
2. Room temperature setting button (TEMP): The set temperature is
raised by 1°C after a single press on “up” button and is lowered by 1°C
after a single press on “down” button. 3. POWER button: pressing this
button you can switch on or off the unit.
4. SLEEP button: after pressing this button the fan sets to low speed.
(1) Press SLEEP button, set the sleep mode. Press the button again to
cancel the sleep mode.
(2) In the cooling mode one hour after the sleep mode is set the
temperature automatically increases by 1°C. In two hours the
temperature will increase by 2°C and the established mode is
maintained for the rest of the time. In the heating mode when SLEEP
function is activated the temperature is, on the contrary, decreased by
2°C in 2 hours.
(3) When power supply is turned off, the sleep mode is automatically
switched off.
(4) When the unit is turned off, settings of the sleep mode are
automatically turned off.
The unit can evaporate condensed water and
automatically drain it through the hose.
1.When the unit is in cooling mode, it is not
necessary to install the condensate drainage pipe
since condensate evaporates automatically. Make
sure that when the unit is operating, the rubber plug
of the drainage hose is securely fixed (see Fig. 0).
2.In heating mode, remove the rubber plug (2) of
the drainage hose (Fig. 10), install the respective
drainage hose to improve heating efficiency.
3.In dehumidification mode, remove the rubber
plug (2) of the drainage hose, install the respective
drainage hose.
Disconnect the air outlet hose, connect the
drainage hose to the drainage hole and drain water
from the unit to ensure maximum dehumidification
efficiency.
5. Timer button: ON TIMER: The ON timer is used to automatically
switch on the unit upon expiration of the set time.
(1) Press TIMER button when the unit is OFF to set the desired time.
(2) After the set time expires, the unit will be automatically switched on.
(3) Press ON/OFF button before the set time expires. Time setting will
be canceled and the unit will be switched on.
OFF TIMER: The OFF timer is used to automatically switch off the unit
upon expiration of the set time.
(1) Press TIMER button when the unit is ON to set the desired time.
(2) After the set time expires, the unit will be automatically switched off.
(3) Press ON/OFF button before the set time expires. Time setting will
be canceled and the unit will be switched off.
6. Automatic fan speed button (automatic ventilation mode).
7. High speed button. High fan speed.
8. Medium speed button. Medium fan speed.
9. Low speed button. Low fan speed.
Fig. 9.