Timberk AC TIM 05H S9, Инструкция по эксплуатации

Страница: 7 / 22

www.timberk.com • Electric air conditioner
7
the indoor unit fan: «Auto», «High», «Middle», «Low».
In “Auto” mode the fan speed will change automatically. In dry mode the
fan speed will remain unchanged – “Low”.
15.Button «SWING». Using this button, you may regulate position of air-
outlet blinds and forward treated air up and down.
16.Button «TIMER». Pressing this button, you may set the time for
turning the conditioner on and off (set the time by pressing “TEMP»
buttons up and down). If the conditioner is off, you may set the time
for automatic turning on in a set time interval. And vice versa, if the
conditioner is on, you may set the time for automatic turning off. Before
activation of the Timer function you may specify the needed settings.
17.Button «SUPPER». Using this button, you may turn the turbo mode
on and off. In this mode the conditioner shows the maximum cooling (in
cool mode) or heating (in heat mode) capacity.
18.Button «ECO» (Economic). Using this button, you may turn the
economic mode on and off. In this mode temperature will increase
(in cool mode) or decrease (in heat mode) slightly – by 2°С from the
specified one.
19.Button «SLEEP» (Night Care). Using this button, you may turn
the sleep mode on and off. In this mode, if working for cooling, the
conditioner will increase temperature by 1 °С from the specified one
within two hours. If working for heating, the conditioner will decrease
temperature by 1 °С from the specified one within two hours. After 10
hours of operation the conditioner will turn off automatically.
20.Button for selection of operating mode – «MODE». Using this button,
you may select a needed operating mode: AUTO, COOL, DRY, HEAT,
FAN.
Indication of the control board display shall correspond to selected
modes.
Work with remote control board
Mounting and replacement of batteries: mount two LR03 alkaline
batteries, according to polarity indicated on the remote control board.
In order to avoid malfunction of the remote control board do not insert
used batteries or batteries of various types.
If the conditioner is not used for a long time, remove batteries from the
board or else electrolyte may leak and damage the board.
а) Power supple indicator
b) Heating mode indicator
c) Cooling mode indicator
d) Temperature indicator
e) Timer indicator
f) Operation indicator
12
13
14
17
15
20
16
19
18
The front panel of air conditioner there is a display that shows the current
temperature and defined, and indicators * display modes and settings:
power, night mode, temperature, timer, compressor operation (see
Figure below**).
The front panel of the conditioner comprises a display showing specified
and current temperature, as well as indicators* reflecting modes and
parameters of work: power supply, sleep mode, temperature, timer,
compressor operation (see the figure below**).
* Presence of this function depends on the delivery lot.
a
b
c
d
e
f
use of particular indicators
depends on model and
series.
** design of indicator
symbols may differ
depending on model and
series.
Description of remote control board
12.Button «ON/OFF» (Power). Using this button, you may turn the
conditioner on or off.
13.Buttons «TEMP» (increase/decrease). Using this button, you may set
needed air temperature indoors.
14.Button «FAN». Using this button, you may select rotation speed of
Fig. 3