3
4.
Assembly and general recommendations for use
Note!
Follow the information contained in this manual while assembly and adjustment.
Users with reduced mobility may need help from a third person who has appropriate skills.
Note!
Do not use the bench when you notice any visible or perceptible damage (e.g. crack)
as this may cause an accident.
Note!
The bench does not contain assembly screws and clamps.
Step 1.
Before assembly, adjust the bench to user’s height. To adjust the height, press
locking pin, select appropriate height, and lock the position of the tubes relative to each
other with the use of locking pin. The legs are adjustable in 2.5 cm increments.
Note!
The pins must be set on the same level in each leg.
Step 2.
Decide and mark the place on the wall where wallplate will be fixed.
Step 3.
Bore assembly holes in the wall using drill at the appropriate height and width.
Step 4.
Screw wallplate to the wall.
Note!
Due to danger, do not use wall shower bench when legs are unstable.
5.
Technical data
Seat dimensions
29-48 cm
Height adjustment
38-53 cm
Weight
2.58 kg
Maximum capacity
135 kg
6.
Notes and recommendations
•
To fold the chair, lift the seat upwards and drop the legs.
•
To unfold the chair, use the handle which is at the legs.
•
Patients with reduced mobility require help from a third person.
•
Do not
exceed maximum capacity of the bench (135 kg).
•
Do not
stand on the bench.
•
Do not
lean on the bench for purposes other than standing up and sitting down.
•
Do not
attach any objects to the bench as it may cause an accident.
