3
Step 4. Adjustment of footplates
Adjust the right and the left footplate by tightening the screw placed at
the bottom of footrest with included key. Adjust the footplates so that
the angle between trunk and thighs is 90
o
.
Step 5. Assembly of protective strap
Put the protective strap on the footrests as it prevents sliding down
user’s legs under the wheelchair from footplates.
Note! Do not use the wheelchair without protective strap.
On completion of the above activities, the wheelchair is ready to use.
FOLDING
•
To fold the wheelchair, remove the toilet bucket first, and
disassemble the seat (and toilet seat – FS681).
•
Before folding, swing away the footplates and set them in vertical
position (perpendicularly to the ground).
•
Grab the straps which are on the both sides of seat frame and pull
them upwards until the frame of the wheelchair is folded.
FLIP-UP FUNCTION OF ARMRESTS
•
Push sideways the locking button located in the front part of the
armrest and push the armrest backwards.
•
To close the armrest, push it downwards so that the locking
button clicks.
WHEEL LOCKS
•
To lock the wheels, push the wheel lock lever forwards until the
wheel is fully blocked (separately for left and right wheel). Please,
note that the wheel lock only serves to lock the wheel when the
wheelchair is at a complete stop.
WHEEL LOCKS ADJUSTMENT
The correct lock of the wheel lock depends on its adjustment and
position. The handle of the wheel lock should be positioned so that the
