Tim Sistem NIKA, Руководство пользователя

Страница: 11 / 20

If there comes to the fire do the following:
• Immediately call the fire squad
• muffle oxygen supply to the chimney and turn off the stove
• Do not insert anything into the chimney and make sure that the fire does not spread to the
wooden construction or other combustible materials in its nearby.
• DO NOT pour water into the stove or chimney
• A fire in the chimney can be extinct only with dry powder
• Water can extinguish only a surrounding material
• Do not cool the surrounding walls with water
Note:
If the fire in the stove for some reason becomes dangerously strong take the following
measures: close air dampers that provide air for combustion. If it is necessary put in the
firebox specially prepared sand for this purpose or non-combustible fire blanket. It would be
good to have a fire extinguisher.
Before the second charging, clean the grid in order to provide the fresh air.
Regularly clean the ash pan making sure that there is always a place for ashes.
The furnace is designed to operate in periodic mode. To maintain the required nominal
power, combustion chamber is periodically filled with prestabled amount of fuel.
Furnace is not designed to operate in continuous modeof heating or in accumulating
temperature mode.
I - regulation of primary air
Primary air regulator set to the open position (Figure 4a) during ignition and hold in this
position until the stove operation gets stable, after insertion of larger wood or briquette
pieces. After that, the controller set to the closed position (for burning wood and wood
briquettes - Figure 4b) and keep it in that position when the oven. When closed, the regulator
prevents the air intake below the grille, which reduces the intensity of the fire. If the fuel is of
poor quality, partially open the regulator.
Figure 4a Figure 4b