Tiltamax Nucleus-M WLC-T03, Руководство пользователя

Страница: 18 / 18

34
Total Weight 330*280*150mm Case Size 4167g
(including battery handle)
142*90.5*70mm (L*W*H)
430g
2.4G
30MW~100MW /1 0 0MW~800MW
0.15A
7.2V EXT. 7.2V~14.8V
18650
-20 ℃ ~+50 ℃
Dry Climates. Avoid condensation in high humidity.
114*92*30.7mm (L*W*H)
225g
2.4G
Quiescent Current
：
0.10A/14.8V
Conventional Current
：
0.5A/14.8V
Locked Rotor Torque Current: 2.8A/14.8V
7.2V~ 24 V
15mm/19mm
15db
Module: 0.8 Teeth: 39
-20 ℃ ~+50 ℃
85*59.5*175.5 mm (L*W*H) （ including thumb unit ）
85*31*175.5 mm (L*W*H) （ not including thumb unit ）
340g / 355g (including thumb unit)
0.1A
Battery: 7.2V E X T : 7.2V~14.8V
18650
2.4G
10MW~100MW
10M~100M
-20
℃
~+50
℃
Dimensions
Weight (with battery)
Operating Frequency
Max Transmission
Distance
Emission Power
Voltage
Battery Type
Operating Temperature
Range
Ideal Environment
Current
Voltage
Rod Compatibility
Noise
Gear
Current
Dimensions
Current
Battery Type
Emission Power
Dimensions
Voltage
FIZ Hand Unit
Motor
Handles
Weight
(with battery)
Operating Frequency
Max Recieving
Distance
500M (unobstructed and upgradeable to 2000M)
Emission Power
30MW~100MW / 10MW~800MW
Ideal Environment
Operating Temperature
Range
Dry Climates. Avoid condensation in high humidity
Weight
(with battery)
Ideal Environment
Operating Temperature
Range
Operating Frequency
Max Transmission
Distance
Dry Climates. Avoid condensation in high humidity
(Additional Long Distance Module)
(Additional Long Distance Module)
Technical Specications
33
Main handwheel 150-300M, handle 75-150M,
maxium distance with amplier 2000M
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help
FCC Statement:
Changes or modications not expressly approved
by the party responsible for compliance could
void the user's authority to operate the equipment
E Z M o d e
EXT1=01 MOTOR
EXT2=00 MOTOR
E Z M o d e R F + i d
Channel:00
UP/DOWN +- Channel
ENTER
Start
E Z M o d e R F + i d
Channel:01
Handle R+L
T03M 1+2
E Z M o d e
EZ Mode
（
Quick Pairing
）
Make sure you turn on all the equipment
Press on FIZ hand
unit at the same time
to enter EZ Mode
Press 【 CH+ 】 【 CH- 】
on the motor which
controls the focus
Press and
【 MENU 】
on right handle and
left handle
Then choose the channel that you need by pressing on the FIZ Hand unit.
The motors start searching
The screen will show as below after the search is completed
"
R"+"L" means right handle and left handle, two handles are now connected
"1"+"2" means Motor No.1 and Motor No.2, two motors are now connected
Press ENTER to conrm
Now, all the equipment should be in the same channel
The motor which controls the Focus will be automtically matched to the same
channel as the FIZ hand unit