TiLite Rigid Aero Z Series Скачать руководство пользователя страница 97

Страница: 97 / 102

TiLite

OM000007 - Rev. B

Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench

1. Remove the rear wheels and place the frame on a

level surface.

2. Remove the two Allen Screws that secure the

adjustable axle plate at the rear of the frame.
Carefully note the placement of the plate and the
order of the various washers and nuts (and, if
applicable, stroller handle and/or armrest receivers).
See Figure 129.

3. Install the anti-tip receptacle as shown in Figure

129.

4. Insert the replacement Allen Screws through the

anti-tip receptacle, the axle plate, the various
washers and the locknuts and securely tighten the
locknuts.

5. Reinstall the rear wheels.

Standard Titanium 5th Wheel

With Single Swivel Caster

(TR, YR and BB)

Adjusting

Tools Needed:
• 3/16” Allen Wrench

1. Loosen the Allen Screws on each clamp. See

Figure 130.

2. Adjust the anti-tip forward or backward. Make sure

the 5th wheel is centered relative to the frame.

3. Tighten the Allen Screws.

Quick Release Titanium 5th

Wheel With Single Swivel Caster

(TR, YR and BB)

Adjusting

Tools Needed:
• 5/32” Allen Wrench

1. Lift up on the skewer handles of the quick-release

clamps and turn counter-clockwise while holding the
skewer nuts in place to permit the 5th wheel to slide
in or out of the frame. See Figure 131.

2. Loosen the Allen Screws on the clamp stops on the

3/4” tube.

3. Adjust the anti-tip forward or backward to desired

position.

4. Rotate the skewer handle of the quick release

clamps clockwise while holding the skewer nut in
place and engage the quick release clamps to
secure the 5th wheel anti-tip.

5. Slide the clamp stops along the 3/4” tube until they

are flush with the frame and tighten the Allen
Screws.

Figure 130
Standard Titanium 5th Wheel Anti-Tip with Swivel
Caster Adjustment

Allen Screws

Allen Screw

Clamp

Figure 131
Quick Release Titanium 5th Wheel Anti-Tip With
Swivel Caster Adjustment

Binder Bolts

Allen Head
Screws

Clamp Stops

Skewer Nut

Skewer Handle

Quick Release
Clamps

Quick Release
Clamp

Allen Head
Screw

Binder Bolt

Clamp Stop

3/4” Tube

Содержание Rigid Aero Z Series







































































































Результаты поиска

Содержание Rigid Aero Z Series

Отзывы:

Похожие инструкции для Rigid Aero Z Series

Бренды по названию

Популярные бренды

TiLite Rigid Aero Z Series, Руководство пользователя

Результаты поиска

Содержание Rigid Aero Z Series

Отзывы:

Похожие инструкции для Rigid Aero Z Series

Бренды по названию

Популярные бренды