TiLite AERO Z Скачать руководство пользователя страница 38

Страница: 38 / 113

3-4

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 3: FOOTRESTS

Angle Adjustable Footrest

Adjusting the Angle

Tools needed:

• 5/32” Allen Wrench

1. Loosen, but do not remove, the two Allen screws that secure the footplate to the clamp. See Figure 3-6.

2. Adjust the footrest to desired angle.

3. Tighten the Allen screws, making sure the screws and the locknuts are secure and will not permit the footplate to

move up or down under weight.

Figure 3-6

Adjusting the Angle

Allen

Screws

Footplate

Clamp

Washers

Locknuts

Adjusting the Height/Replacing

The Angle Adjustable Footrest (see Figure 3-7) for the Aero Z wheelchairs can be replaced, or the height adjusted, by
using the tools and following the procedures under “Titanium Footrest (Aero Z)” on page 3-3.

Figure 3-7

Angle Adjustable Footrest

Angle Adjustable High Mount Footrest

Adjusting the Angle

Tools needed:

• 5/32” Allen Wrench (no extension tubes)

• 3/16” Allen Wrench (extension tubes only)

1. Loosen, but do not remove, the Allen screws. See Figure 3-8. If your footrest has extension tubes (see Figure

3-9), you will have 3/16” Allen screws in place of locknuts and you will only need to loosen these latter Allen

screws to adjust the angle.

2. Adjust the footrest to the desired angle.

3. Tighten the Allen screws and locknuts (or 3/16” Allen screws), making sure the screws and the locknuts (or 3/16”

Allen screws) are secure and will not permit the footplate to move up or down under your weight.

Содержание AERO Z


















































































































Результаты поиска

Содержание AERO Z

Отзывы:

TiLite AERO Z, Руководство пользователя, Страница: 38 / 113

Результаты поиска

Содержание AERO Z

Отзывы: