Tilia Termoventiler ThermOmatic ERA 10, Инструкция по установке и эксплуатации

Страница: 2 / 8

Termoventiler AB
2
0
1 0
5
R e t u r n
H o t
w a t e r
B o i l e r
R a d i a t o r
M i x i n g v a l v e
F l o w s e n s o r
F l o w p i p e
1. Installation of bypass valve
2. Connection of cables
3. Mounting of mixing valve motor to mixing valve
4. Installation/checking of direction of movement
5. Installation of flow sensor
6. Placement of room sensor
1. Installation of bypass valve
The bypass valve can be mounted in 4 different ways
(see below). Mount the number plate so that it
corresponds with the mounting in question (see
below). Set bypass valve to position 5 (mid dial, see
A
Anticlockwise closing
This modification
applies to ESBE 3MG
For other makes, see
user instructions for
respective valve.
Order of installation and contents
7. Mounting of room sensor
8. Commissioning
9. Radiator thermostats
10. Adjustment of room sensor
11. Max setting
12. Manual adjustment
D
Clockwise closing
C
Anticlockwise closing
B
Clockwise closing
1. Installation of bypass valve
3. Mounting of mixing valve motor to mixing valve
2. Connection of cables
4. Installation/checking of direction of movement
5. Installation of flow sensor
6. Placement of room sensor
Alternative order of installation (e.g. if mixing valve is readily accessible)
7. Mounting of room sensor
8. Commissioning
9. Radiator thermostats
10. Adjustment of room sensor
11. Max setting
12. Manual adjustment
illustration below) and remove dial/handle without
moving the spindle position. Note which direction
the mixing valve spindle is to rotate to close
(clockwise or anticlockwise).
1 0
0
5
R e t u r n
F l o w p i p e
H o t w a t e r
B o i l e r
R a d i a t o r
M i x i n g v a l v e
F l o w s e n s o r
1 0
0
5
R e t u r n
H o t w a t e r
B o i l e r
R a d i a t o r
M i x i n g v a l v e
F l o w s e n s o r
F l o w p i p e
0
1 0
5
R e t u r n
F l o w p i p e
H o t
w a t e r
B o i l e r
R a d i a t o r
M i x i n g v a l v e
F l o w s e n s o r