tilgin HG350 Series, Быстрое руководство

Страница: 13 / 20

13
5.
Troubleshooting Tips
If the home gateway is not working as expected, please try out the following
troubleshooting tips.

Check the cable connections.

Check if the power LED is lit. If not push the ON/OFF button to ON.
Check that the power cord is attached in both ends.

If the power LED not lights stable green within 30 minutes reboot (push
power ON/OFF)

If the power LED still not lit stable green after reboot contact your
service operator.

If the WAN indicator (front of the gateway) does not lit green (front of
the home gateway), check that the Ethernet cable is properly
connected.

Verify that the LEDs lights according to the table in LEDs front panel
page.

Verify that you can hear a dial tone after hooking off the telephone
receiver. If not check that the telephone line cord from the telephone is
connected to one of the phone ports.

If your operator provides Web GUI access, status information is
available via a computer login to the home gateway. Please see
information provided by your operator.
If these actions still do not solve the problem, contact your operator or the
vendor that supplied your home gateway.
6.
Safety Information
Tilgin AB products are designed and tested to meet the international Safety of
Information Technology Equipment standard. This standard provides general safety
design requirements that reduce the risk of both personal injury and product injury,
protecting against the following hazards:

Electric shock (hazardous voltage levels)

Fire (overload, temperature, material flammability)

Energy (high energy circuits or potential burn hazards)

Heat (accessible parts of the product at high temperatures)

Radiation (noise, etc.)