manualshive.com logo in svg

tiki 1005-51, Английская инструкция

Поделиться
Скачать
tiki 1005-51 Скачать руководство пользователя страница 17

ENGLISH – Tiki start

 17

Note that the power-off state, is considered an abnormal situation. 
The battery power is sufficient for another 15 minutes. 
As this alarm of lights and sound emits, the user has to:

 

■

Leave the hazardous environment

 

■

Charge the internal battery of the blower unit

 

■

As necessary, charge the external battery

2.3.4  Filter warning or leak

The indicator light that is closest to the on / off button is on.
The other two (2) indicator lights flash.
The blower emits an alarm sound every one (1) second.
This indicates that either:

 

■

The inhalation filter is blocked

 

■

A major leak occurred

In either situation, the user has to:

 

■

Leave the hazardous environment

 

■

Evaluate what caused either the leak or the situation with the filter

 

■

If a situation with the inhalation filter occurred, replace the filter as to: 
5.2 Replace the inhalation filter on page 36

 

■

If a leak occurred due to a mechanical issue, please replace the faulty parts 
according to the individual instructions in chapter 3 from page 23

 

■

If a leak occurred to an unknown reason, refer to: 
1.3 Before use on page 5

 

■

If either the above is the reason for the alarm, contact Tiki Safety AB

Содержание 1005-51

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды