TiGHT AV MSW-H412AC-DS Скачать руководство пользователя страница 35

Страница: 35 / 36

18G 4x2 HDMI Matrix Switcher

Firmware Upgrade

MCU upgrade by USB

Please follow the steps as below to upgrade firmware by the

port on the front panel:

Prepare the latest upgrade file (.APP) and rename it as “

08010000.APP

” on PC.

2) Power off the switcher and connect the

port of switcher to the PC with USB

cable.

3) Power on the switcher, and then the PC will automatically detect a U-disk named of

“BOOTDISK”.

4) Double-click the U-disk, a file named of

“READY.TXT” would be showed.

Directly copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk.

6) Reopen the U-disk to check the filename

“READY.TXT” whether automatically

becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully,

otherwise, the firmware updating is fail, the name of upgrade file (.bin) should be

confirm again, and then follow the above steps to update again.

7) Remove the USB cable after firmware upgrade.

8) After firmware upgrade, the switcher should be restored to factory default by

sending command.

MCU upgrade by Web UI

1) Open the Web UI as described in section

6. GUI Control

and navigate to the tab

Device Settings

2) Click on

Browse

and select the MCU firmware file.

3) Click

Update

4) After firmware upgrade, the switcher should be restored to factory default by clicking

Factory Reset

Содержание MSW-H412AC-DS




































Результаты поиска

Содержание MSW-H412AC-DS

Отзывы:

Похожие инструкции для MSW-H412AC-DS

Бренды по названию

Популярные бренды

TiGHT AV MSW-H412AC-DS, Руководство пользователя

Результаты поиска

Содержание MSW-H412AC-DS

Отзывы:

Похожие инструкции для MSW-H412AC-DS

Бренды по названию

Популярные бренды