Multi-function AV Distribution System
13
4.4 IR Connection
The control panel provides a built-in IR sensor and the receiver provides an
IR OUT
port for IR pass-through control. Connect IR emitter to the
IR OUT
port of the receiver,
and then put the IR emitter close to the display device (e.g. Projector), and put the IR
remote of display device close to the built-in IR sensor, the display device can be
controlled by pressing IR remote.
RESET
LINK
SOURCE SELECT
HDMI IN 2
HDMI IN 1
TO PC
HDMI 1
HDMI 2
CONFIG
IR
VOLUME
HDMI 1
HDMI 2
MIC
SOURCE
DISPLAY ON
DISPLAY OFF
SOURCE
DISPLAY
ON OFF
/
POWER
RS232
Projector
IR Signal
IR Signal
Stan
dby
IR Signal
Laptop
