TigerStop TigerRack, Руководство по установке

Страница: 9 / 36

9
4. Attach TigerRack using the supplied hardware. T-Nuts are inserted into mounting slots on the bottom
of TigerRack from the factory.
5. Remove the eye bolts when attachment is complete. Leave the lifting plates in place.
Note: Do NOT power up TigerRack with the eye bolts in place.
Install Pusher Attachment
Bolt
Washer
T-Nut
1. Insert T-Nuts into slots on the Pusher Attachment.
2. Place Pusher Attachment on the flip away stop and insert the bolt and washer from the top, as
shown.
2 Mounting
Points
2 Mounting
Points
Align the Rack
The rack is separated into sections on the back of TigerRack. The rack must remain properly aligned to
maintain accuracy. It is important to adjust the rack during installation.
To align the rack...
1. Loosen the rack section to be aligned.
2. TigerRack comes with a sample rack piece for alignment. Clamp the sample rack piece, upside
down, to an adjacent aligned rack section.