TigerStop SAWGEAR, Руководство по установке

Страница: 13 / 24

13
Enable Your SawGear
Once you have registered your SawGear warranty, you can enter your SawGear enable code.
Note: Your SawGear warranty begins on the day your SawGear is enabled.
1. When SawGear is powered up, the screen will ask for your enable code.
2. Enter the code given by TigerStop Customer Service and press .
First Power Up Routine
When SawGear is powered up for the first time, it will need to know a little bit about your saw setup. It
will walk you through 3 questions.
Note: The messages shown below will scroll across the screen if they are longer than 16 characters.
1. SawGear will ask which language you use. Press for English, for Spanish, for
French, for Dutch or for German.
2. SawGear will ask which units you use. Press for Metric or for Inches.
3. SawGear will ask which side of the PowerHead the saw is attached to. Press for Left or
for Right.
SawGear Home Routine
• SawGear will move as far away from the saw as possible
• SawGear will then move as far toward the PowerHead as it can
• SawGear will stop when finished
Note: If SawGear doesn’t do the routine in this exact order, you may have selected the saw side incorrectly. Remove the power cord and hold
while plugging it back in to repeat the first start up routine.
4. Ensure the table is clear. Press Start to begin the home routine.
5. SawGear will display its working length, as calculated during the home routine. Press to
continue.