Tigercat E620C Skidder
Introduction
iii
Tigercat E620C Skidder
INTRODUCTION
An Operator's manual, Service manual and a Parts catalog are provided by
Tigercat
to assist the dealer,
customer and operator in becoming familiar with the features of the E620C Skidder serial numbers
6205001 and up.
The operator's manual will assist the operator with the techniques of proper and safe operation of the
Skidder. The service manual contains safety guidelines, a preventive maintenance schedule and
servicing procedures to ensure optimum machine performance.
Section 1 in both the operator's manual and the service manual contains safety information that must be
followed. As well, throughout the rest of the manuals WARNING and CAUTION notices are displayed
where necessary, drawing attention to possible hazards when performing certain procedures.
Only trained personnel should be allowed to operate or work on the machine.
The information contained in this manual is current at time of printing. Improvements to the machine are
on-going and may not be covered, therefore in these cases contact your
Tigercat
dealer for the
appropriate information.
The phrase
"and up"
appearing in this manual after the serial number implies that the related
information is current for any machine serial number HIGHER than the serial number preceding the
"and
up"
.
Tigercat reserves the right to make changes to the machine after this manual release date that may not
immediately appear in this manual.
Every effort is made to send out updates on a regular basis. If the machine in question was built after
the release date of this manual and there is a discrepancy, call Tigercat service department. The release
date appears on the first page.
The Company reserves the right to change information contained herein at any time without prior notice.
Tigercat Industries Inc.
epcatalogs.com
