Tiger TWR-120, Руководство оператора

Страница: 26 / 86

Introduction Section 2-2
© 2004 Alamo Group Inc.
INTRODUCTION
INTRODUCTION
TWR-180 / TWR-120 12/04
Your heavy-duty Cutter is designed primarily for weeds, grass, and brush up to 2" in diameter. With proper
maintenance as described in this manual, your Cutter will provide you with years of dependable service with a
minimum of repairs.
It is required that all operators of this implement read this manual or be instructed of its contents as to safety,
proper operation, and maintenance before beginning operation.
Your Cutter has been assembled for operation with a tractor PTO input speed of either 540 or 1000 RPM. Should
you desire to change PTO input speed, contact your local Tiger dealer who will assist you in performing the
necessary modifications.
When ordering parts for the Gearboxes and the Drivelines, be sure to specify the serial number. The serial number
is located outside of the right Tongue attaching Plate on the center Mainframe section.
Chain Guards, Driveline Integral Shields, and Gearbox Shields are standard equipment and are to be used at all
times.
To place the warranty into effect, fill out the warranty card in full, giving all the requested information, and mail
promptly. Be sure to give the serial number of this Cutter.