TARE function
1. Turn on scale as described above
2.
Place the “tare item” on the platform
3.
Press “TARE” and wait until “0.0” (or “0”) is displayed
CALIBRATION
1.
Turn on the scale by pressing ON/OFF key, press “MODE” key quickly and
hold it until LC
D displays “CAL”.
2. Press the MODE key again, the
LCD flashes “CAL” and ”100.0” (subject to
the capacity of your scale) for three times, now add corresponding cal
weight on the scale, wait 3-
4 seconds, LCD displays “PASS” and back to
normal weighing mode.
3. Take away the calibration weight and press ON/OFF key to turn off scale,
the calibration is finished.
Care Instructions
Avoiding any exposure to extreme heat or cold, your scale works better
when operated at normal room temperature. Always allow the scale to
acclimate to normal room temperature for at least one hour before use.
Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air
currents and a close distance to other electronic equipment can all cause
an adverse effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed onto tray top.
Although this scale is designed to be quite durable, try to avoid rough
treatment as this may permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the scale. This is a
precision instrument and must be handled with extreme care.