14’x6’ TIGERFLEX
®
ZORA LOG CABIN INSTRUCTIONS
12
tigersheds.com
0113 205 4189
Step 3:
FLOOR ASSEMBLY
(MODULE PACK: B)
• Take 4 full logs from Module Pack B and slot them into place as shown.
Do not secure with screws
.
• Decide at this point where you would like your door to be positioned. If you plan on having it on one of the
gable ends, place your first floorboard at the door end chosen. Leaving approx. 2mm gap at the edges.
Step 4:
FLOOR ASSEMBLY
(MODULE PACKS: H, J & Q)
• Take 4 floorboards and tack in place as shown below using 30mm
(N30)
galvanised Nails.
Do not fully secure as these are only to keep the floor square before installing remaining floorboards.
• Align the inner floor bearers so that they are equal across the floor.
N30
N30
