Tiger PDU-A30A, Руководство пользователя

Страница: 19 / 52

English
18
Where to buy replacement parts and accessories.
Contact customer service
Gaskets (Consumer replaceable parts)
We recommend replacing the gasket annually or
following these cases:
• Color changed to white.
• Any deterioration, spots become bigger.
• Steam coming out from gaps on the side.
Parts code PDN1036
Resin parts
Resin parts may deteriorate over time due to contacting
heat and steam. Replacement lid is purchase separately.
Mesh filter (consumer replaceableparts)
• Attach mesh filter when cleaning the unit with citric acid.
If mineral deposit is not removed, please purchase new
one.
Parts code PVH1045
How to replace lid gasket
How to remove
Lid gasket orientation
Screw
Lid gasket
Unfasten the
screws
Remove lid
gasket
Insert the lid gasket on to inner cover in
proper position.
Attach 3 screws securely.
How to attach
Fit the
gasket
into
groove
Lid gasket
Cross-section
Run fingers
around inner
cover to press
in to groove
Be sure the gasket is attached properly.
Caution
Do not remove inner cover from lid. Improper
setting cause steam leakage and hot water does
not dispense. If inner cover comes off, reattach
the parts as shown below.
3 Screws
Inner cover
Lid gasket
Small gasket
Plug valve
Plug valve base
Plug
Inner plate
Lid
Be sure to set in
the direction
shown in this
illustration.
(If set improperly,
hot water may spill
and cause scalds.)
Replacing parts for the lid should only be
done by a qualified technician. Please
contact your local distributor or Tiger
directly.