Tiger JD 5065 / 5085 - 5105M, Монтаж и эксплуатация

Страница: 77 / 224

OPERATION
SIDE ROTARY Operation Section 3-21
© 2011 Alamo Group Inc.
OPERA
TION
7.7
7.6 Driving the Tractor and Implement
Start off driving at a slow speed and gradually increase your speed while maintaining complete control of the
tractor and unit. Moving slowly at first will also prevent the tractor from rearing up and loss of steering control.
The tractor should never be operated at speeds that cannot be safely handled or which will prevent the
operator from stopping quickly during an emergency. If the power steering or engine ceases operating, stop
the tractor immediately as the tractor will be difficult to control.
Perform turns with the tractor and units at slow speeds to determine how the tractor with an attached blade or
rake handles a turn. Determine the safe speed to maintain proper control of the tractor when making turns.
When turning with a towed implement, the overall working length of the unit is increased. Allow additional
clearance for the units when turning.
To avoid overturns, drive the tractor with care and at safe speeds, especially when operating over rough
ground, crossing ditches or slopes, and turning corners. Tractor wheel tread spacing should be increased
when working on inclines or rough ground to reduce the possibility of tipping.
Use extreme caution when operating on steep slopes. Keep the tractor in a low gear when going downhill. DO
NOT coast or free-wheel downhill.
OPS-U- 0014
When confronted with an incline or ditch, do not
approach from an angle which is perpendicular or
straight on as damage may occur.
When crossing such terrain, the implement should
be fully lowered for a lower center of gravity and
added stability.
OPS-R-206