background image

8

Caution

 

Do not start coffee extraction with 

no water in the upper cylinder.

Doing so may result in fire or a malfunction.

  Do not remove the upper cylinder 

or lid during coffee extraction.

Doing so may result in burns, water 

leakage, or a malfunction.

  Do not forcefully pull on the large and small lower 

gaskets attached to the upper cylinder. 

 P. 17

Doing so may cause a malfunction.

  Do not forcefully pull on the small gaskets (in 

eight locations) attached to the joint. 

 P. 17

Doing so may cause a malfunction.

  Wait for the upper cylinder to cool down 

(wait approximately 10 minutes) before 

removing it after coffee extraction.

Failure to do so may result in burns.

Safety instructions to follow so that the 

appliance can be used for many years

 

z

 Do not use this product with less 

water than the minimum amount (the 

one cup water level). Also, do not 

insert more water than the maximum 

amount (the two cup water level).

 

z

Do not leave water or 

coffee in the upper 

cylinder or tray.

Doing so may cause a 

malfunction, discoloration, 

unpleasant odors, or 

spoilage.

 

z

Do not start coffee extraction with anything 

other than water in the upper cylinder.

Doing so may cause a malfunction.

Gaskets

Filter

Lower cylinder

Tray and tray cover

Lid/Upper cylinder/Joint

Caution

  Be sure to set the upper cylinder 

gasket, joint gasket, and water pumping 

pipe gasket in place before use.

Failure to do so may result in burns, water or steam 

leakage, defective operation, or a malfunction.

Caution

  Do not forcefully pull 

on the filter gasket. 

 P. 17

Doing so may cause a 

malfunction.

Caution

  Do not extract coffee with the 

lower cylinder removed.

Doing so may cause hot water to 

splash out, resulting in burns.

  Wait for the lower cylinder to cool down 

(wait approximately 10 minutes) before 

removing it after coffee extraction.

Failure to do so may result in burns.

Caution

  Do not use this 

product with the 

tray or tray cover 

removed.

Doing so may result in 

burns and/or spillage.

 

Precautions on each part

Upper cylinder gasket

Upper cylinder

Lid

Upper 

cylinder

Tray

Joint

Tray cover

Tray

Water pumping pipe gasket

Joint gasket

Filter gasket

Содержание ADS-A02U

























Отзывы: