1.800.661.4661
View demonstration videos and a
complete product list at
tigertool.com
Technical Support
Operating Instructions
Have What It Takes
Peterbilt Air Trac Pin
& Bushing Adapter
15012
Bushing Removal
1
Remove torque rod from the suspension.
Figure A
2
Thread on the 15001-55 cylinder adapter to the 17202
hydraulic cylinder.
3
Attach the 15001-79 face plate on to the 15001-57 extension
tube and place the two pcs on to the 15001-55 cylinder
adapter and 17202 hydraulic cylinder assembly.
4
Place the 15001-112 push adapter over one end of the
bushing and install one 15001-125 threaded pin, hand
tighten with the provided ¼" socket driver.
5
Insert the 15001-3 pull-bar through the 15001-126 pull
adapter. Place the pull adapter/pull-bar over the other
end of the bushing and install the remaining 15001-125
threaded pin.
6
Slide the hydraulic cylinder, cylinder adapter, spacer tube,
face plate over the pull-bar assembly and thread on the
15001-7 trigon nut, hand tighten.
7
Connect your 10,000psi hydraulic pump to the cylinder and
apply force until the cylinder has fully extended (approx.
2"). Release pressure and hand tighten trigon nut. Repeat
until bushing is removed.
8
Remove adapters from the old bushing and
disassemble tooling.
Figure A
15001-125
15001-57
15001-79
15001-55
15001-112
15001-126
