Operating Instructions
Race Installation
CAUTION:
Always follow Manufacturers
recommendations when servicing bearing races.
1
Place bearing race into the hub while ensuring the race
seat is clean and free from burrs or debris.
(Figure E)
2
Place the appropriate installer plate onto the race with
its tapered side down.
(Figure F)
3
Place hub onto shop-press and engage press ensuring
equal and even pressure is being applied. It may be
necessary to tap the installer plate with a hammer
if the race is not parallel to the hub. You will have to
carefully watch the entire installation to ensure the
race stays parallel.
(Figure G)
4
Once race is seated, release hydraulic pressure from
press and disassemble all components ensuring they
are clean, and ready for the next use.
Here at Tiger Tool, your satisfaction is our number one
priority. Should you have any questions about this or any
of our products, please call us at 1.800.661.4661.
E
F
G
1.800.661.4661
View demonstration videos and a
complete product list at
tigertool.com
Technical Support
Have What It Takes
Bearing Race Starter Kit
10908
