1.800.661.4661
View demonstration videos and a
complete product list at
tigertool.com
Technical Support
Have What It Takes
Haldex Multi Adjustable
Automatic Slack Adjuster Puller
10410
Operating Instructions
Threads must be clean and well lubricated at all times.
Do not use over a
1⁄2
” impact wrench—doing so will
void warranty.
1
Remove clevis pin from the end of the slack adjuster
with the Tiger Tool 10501 Brake Clevis Pin Press.
Remove the slack adjuster rod from the slack adjuster
with the Tiger Tool 10502 Slack Adjuster Rod Pin Press.
2
Select the bent or straight arm and attach to the main
puller body with the
1⁄2
” x 1” bolt supplied. Do not
tighten at this time. Note: straight arm is for older
style Haldex slacks. The bent arm is for newer angled
and/or offset Haldex slack adjusters.
3
Back out the forcing screw, slip the puller onto the
slack adjuster. Align the tip of the forcing screw with
the center of the s-cam.
4
Secure the selected arm to the slack adjuster through
the clevis hole using supplied
1⁄2
” x 2
1⁄2
” hardware.
5
Tighten
1⁄2
” x 1” and
1⁄2
” x 2
1⁄2
” bolts to securely
mount the puller to the slack adjuster.
6
Turn the forcing screw by hand or with an
impact wrench.
7
Hold the puller and slack adjuster to keep it from
falling to the ground.
Here at Tiger Tool, your satisfaction is our number one
priority. Should you have any questions about this or any
of our products, please call us at 1.800.661.4661.
