background image

Tiger Box1 Assembly Guide                                                                                                                                                                                                                                  

Hardware Monitoring: Hardware Monitoring

18

1.

Plug one end of the cable into the network port of the appliance.

2.

Do one of the following:

• 

Plug other end of the cable in the network port of the client computer.

• 

Plug other end of the cable in the port of the Ethernet switch and then connect 

the switch to the client computer's network port.

Note: 

If you opt for interconnection via switch, refer to your switch documentation 

for further setup instructions.

To connect a computer to the Admin port:

1.

Plug one end of the network cable provided in the shipment in the port with label 
Admin port.

2.

Plug other end of the network cable in the LAN port of the computer, from which 
you want to access the web interface.

Important: 

The Admin port is designed solely as a safety net, allowing you to 

access the web interface, when you have misconfigured the appliance’s network 
identification and fail to access it from any computer.

Hardware Monitoring

Audible Alarm

The appliance sounds an audible alarm (beeping), in case of a power supply error - a 
power module has failed or is not present. To confirm the problem, check the power 
status LED on the front panel bezel (see “Monitoring the System Activity” on page 19). 

Note: 

The alarm continues beeping until the problem is resolved.

Содержание Tiger Box1






























Отзывы: