Tiger Serve 1U Assembly Guide
Site Installation: Cabling Tiger Serve 1U
11
3.
Plug one end of the fiber-optic cable into the SFP socket of the FC port.
4.
Do one of the following:
•
Plug other end of the fiber-optic cable in the port of the Fibre Channel card of the
storage.
•
Plug other end of the fiber-optic cable in the port of the Fibre Channel switch that
is connected to the shared storage.
Note:
If you opt for interconnection via switch, refer to your switch documentation
for further setup instructions.
To interconnect Tiger Serve through the 10GbE port:
Note:
Your Tiger Serve shipment does not include copper and fiber-optic cables.
1.
Remove the protective black cap from the 10GbE port.
2.
If your fiber-optic cable has protective caps, remove them.
