3.5 Supporter Mode - Software
16
Explore Endless Creativity with Tiger 3D
PrinterTool Special Features
Grid :
When enabled, shown is a grid over the plate.
Angle :
Enables a visual indicator of the most common undercuts and overhangs.
PrinterTool will show in red the areas where supports might be needed.
-
Hint :
Use this tool to familiarize with the support structure concept. Try from 6 to 20 degrees.
-
Disclaimer :
Due to the variety of geometries and possibilites, always visually check for other areas
where supports must be carried.
Sliced:
Enables the Slice Tool from the Platform Mode.
-
Mirror Supporter:
Creates mirror supports as two dimensional axis reference.
-
Hint :
Use this handy tool to quickly and accurately create supports in symmetric models.
Base:
Creates a base at the bottom of the model. Use can select shape, thickness and size of the base.
-
Hint :
It is recommended to create a FULL BASE in one of the models of the build plate. This will generate a complete
base to all the models on the build plate. It is a good practice to extend the life expectancy of the foil of the tank and
cohesion through the first printed layers.
-
Hint :
it is recommended to change the thickness of the base to 0.3mm.
