Tiffin Motorhomes 2011 Phaeton, Руководство пользователя

Страница: 48 / 173

M A J O R A P P L I A N C E S & A C C E S S O R I E S
4-12
Programming AM/FM Stations: Select a radio station then select a button 1, 2, 3, 4, or 5 and push and hold
until it beeps. The radio station is now programmed to that button.
Recalling Programmed Radio Stations: Push button 1, 2, 3, 4, or 5 to recall a pre-programmed station.
Clock Settings
Display Button: Push and hold the DISP button until the clock is flashing in the display.
Adjusting the Minutes: Rotate the TUNE knob to the Left to adjust the Minutes.
Adjusting the Hours: Rotate the TUNE knob to the Right to adjust the Hours. Note the AM/PM indicator.
NOTE: When correct time displays wait a few seconds to allow the time to program.
CD Operation:
Playing a CD: Insert a CD (label side up) into the CD slot. The CD will auto-load and start playing. NOTE: If a
CD does not auto-load, DO NOT FORCE into the slot, as you may already have a CD loaded.
CD Track Selection: Rotate the TUNE knob left or right to change the track.
Ejecting a CD: Push the EJECT button to eject a disc.
Pausing a CD: Push the MUTE button to “Pause” disc, press again to resume play.
CD Changer (optional):
Load CDs: Insert the CD magazine into the external CD changer.
Selecting the External CD Changer: Push the MODE button until “CDC” appears in the display.
CD Selection: Push button 1 or 2 to scroll through the selection of CDs in the CD changer. If a CD is not in
one of the trays, the unit will continue until the next CD is found.
CD Track Selection: Rotate the TUNE knob left or right to change the track.
Reset Button:
The radio panel or LCD display may fail to function normally due to the vehicle’s battery condition, and may
require resetting the microprocessor if:
The vehicle has been “jump started” from a dead battery condition.
The vehicle battery becomes very low and is quick-charged.
The vehicle battery is removed and replaced.
Should this condition occur, simply press and release the RESET button on the radio panel using the tip of a
ball point pen. All station programming should remain, but you will have to reset the clock.