Tiffen steadicam aero, Руководство оператора, Страница: 27 / 62

Balancing
Fine tune this axis by turning the Side-to-Side
Knob one way or the other to bring the
camera completely level.
You can reference the built in level on the
Stage or use a small accessory level.
Note: if you reach the end of the adjustment
range with the Side-to-Side Knob and your
camera is not level, you might need to re-
mount the camera on the Quick Release Plate
in a different location.
Third: set the side-to-side balance –
While still on the balance pin, loosen your grip
again to see if the camera leans side-to-side.
The side-to-side lean should be minimal if you
were able to align your side-to-side balance
mark with the center of the Post.
Your Sled should be resting with the Post
vertical now.
If either axis is slightly off vertical, go back
and adjust it with the appropriate Balance
Knob.
23