Wipe the external surface with a soft damp cloth.
Periodic descaling will maintain the best performance of the kettle. Descale intervals depend on the
hardness of your local water supply.
POSITIONING
Put the power base on a stable, dry, level surface.
The underside of the base is fitted with a cord storage feature. Unwind the length of cord required to
reach the power outlet.
Ensure the cord does not overhang, and cannot be caught or tripped over.
FILLING
CAUTION: If the kettle has just boiled, it will be full of steam. Keep hands clear, as steam may
escape from the kettle when opening the lid.
Remove the kettle from the power base unit.
Press the lid release button and pull lid back. To close lid simply press the lid.
Fill the kettle with the desired amount of water, but do not fill above the ‘Max’ line. Do not overfill the
kettle over the Max level because the boiling water will be ejected from the spout while operating.
The minimum amount of water should reach the Min marking.
Close the lid and place the kettle back on the power base. Make sure the lid is securely closed
before boiling.
NOTE: The water level should be between the MIN and MAX fill line.
SWITCHING ON
CAUTION: Keep clear, as steam may escape from the spout when boiling.
NOTE: Do not use the housing without base.
Position the kettle on the power base.
Plug the kettle into a power outlet and switch on.
To switch on, lift up the On/Off switch, the kettle will begin to boil. The indicator light will light up.
SWITCHING OFF
When the water boils, the kettle will automatically switch itself off.
You can stop the boiling process at anytime by lifting the On/Off switch to the ‘Off’ position.
Ensure that the kettle is switched off before removing it from its base.
To pour water from the kettle, take the kettle from the base.
BOIL-DRY PROTECTION
Using the kettle with insufficient water will shorten the life span of the element.
