Nominal voltage range:
50 ... 11000 V AC / 16000 V DC
Frequency range:
0 ... 500 Hz
Input resistance:
55,8 MΩ
Measurement current:
0,29 mA at 16000 V DC
Surge voltage strength :
> 300 kV (VDE test report available)
Indicator group:
I and III
Display:
red LED for voltage > 50 V AC / 120 V DC
green LED for standby / absent of voltage
two-line LCD with backlight white / red for indication of voltage,
frequency, type of voltage, and battery condition
acoustic signal at > 50 V AC / 120 V DC
Measurement range / limit deviation:
50 … 1000 V DC ± 2,5% + 5 digits
50 … 1000 V AC ± 5% + 10 digits
1,01 … 16,00 kV DC ± 2,5% + 5 digits
1,01 … 11,00 kV AC ± 5% + 10 digits
On-time:
15 min
auto-off when absent of voltage
Construction:
for indoor and outdoor installations#
Operating temperature:
–15° C … + 55° C
Self-test:
function and protective resistors
obligatory before indication of measurement results
Power supply:
9 V block IEC 6LR61 / 6LF22 / 6LP3146 alkali-manganese
multi-stage battery indicator
Design:
two-pole voltage tester with firmly attached high-tension
test probes made of GRP with moulded resistor decades,
approx. 27,9 MΩ each probe impact resistant,
dust proof plastic casing with unbreakable display cover,
protection category IP 65
twin insulated PUR hose cable
Standards:
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and EN 50110-1 (VDE 0105-1)
(further details see risk analysis)
Test label:
date of the next examination on the sticker
repeated inspection at least every 6 years
Dimensions / weight:
1,0 kg / approx. 1150 x 200 x 60 mm
11. Technical Data MultiSafe DSP HS11
15
