Dust bin
Cyclone mesh filter (filters dust, hair, bread crumbs and other visible waste)
Foam air filter (filters fine dust, microorganisms)
HEPA filter (filters 99.95% of dust, pollen, bacteria and other allergens ≥0.3 microns)
Automatic brush roll (pulls hair, fabric lint, dust mites and other allergens and
microorganisms from bedding)
Instruction for use and maintenance
Power button
Press the power button to start the device (the front LED light with turn on). Press it
again to turn the device off.
Cleaning the dust bin
Before cleaning the device, always remember to turn off the device and disconnect the
power plug from an electrical outlet.
In order to maintain the device in good condition and prolong the engine’s efficiency
and life, empty the dust bin and clean it frequently.
1.
Hold the main body and turn the dust bin clockwise to detach it.
2.
Detach the foam and cyclone air filter from the dust bin to empty it.
3.
Put the filters back into the dust bin.
4.
Hold the main body and turn the dust bin counterclockwise to reattach it.
Cleaning the filters
All filters, except the HEPA filter, can be washed under the running tap water. In order
to maintain the device working properly, clean the filters frequently.
1.
Detach the dust bin from the main body.
2.
Remove the filters.
3.
Clean the inner filters by rinsing them under the running tap water.
4.
In case the cyclone and the foam air filters are dirty, you may also rinse it with
warm water.
5.
Leave the filters to dry before putting them back in. If the filters are not fully
dried, the moisture might get absorbed into the engine and damage it.
6.
Do not microwave, rinse under hot water, or wash the filers in the laundry
machine.
